Industrial water treatment chemicals · Manufacturer & global B2B supply[email protected] · +86 177 3480 9172
RYZE Technology logoRYZETECHNOLOGY
APPLICATION

Pulp, paper & textile

Retention and drainage in the paper machine, foam in white water, and colour plus COD in dyeing effluent — three different chemistries in one sector.

Paper and textile plants are chemically intensive already: the job is not to add more products but to make the existing ones work together. Retention, foam and colour each have a measurement that tells you whether chemistry is the answer.

Paper machine: retention and drainage

MeasurementDecides
First-pass retention (ash and fibre)Retention aid type and dose
Drainage time on the wireWhether a drainage aid is needed
White-water consistencyLosses and sewer load
Foam height in the headboxDefoamer requirement

Route: cationic PAM 0.02–0.1% on fibre, sometimes with a coagulant upstream, plus a silicone or polyether defoamer at 50–300 ppm in white water. Microparticle systems exist, but they are a programme, not a single product.

Textile dyeing: colour and COD

MeasurementDecides
Colour (Pt-Co or ADMI)Coagulant dose, carbon requirement
COD and BODBiological vs chemical route
Sulphide, salt, pHPre-treatment before coagulation
Batch vs continuous dischargeEqualisation and dosing control

Route: PAC or PFS coagulation at pH 6–8, anionic or cationic PAM flocculation, then powdered carbon or GAC for residual colour. Reactive dye baths often need a higher coagulant dose than the mixed effluent.

Sludge

Both sectors produce sludge that dewaters well with cationic PAM, 0.3–1.5 kg/t DS, provided the fibre or dye chemistry has not already been over-coagulated.

What goes wrong

  • Retention drops after a furnish change — charge demand changed; re-run the retention test rather than raising the dose.
  • Foam in the headbox despite defoamer — dosing point too far upstream or the wrong defoamer type for the temperature.
  • Colour rebounds after carbon — carbon saturated or competing organics; check bed volumes and contact time.
  • Sludge will not dewater — coagulant overdose has made the floc brittle; reduce the metal dose.

Send furnish or dye recipe, pH, colour and COD, and the current chemical programme. We propose a grade and a starting dose for a mill trial.

Questions buyers ask

Direct answers

Which retention aid for fine paper?

Cationic PAM is the standard single-product answer, dosed at 0.02–0.1% on fibre. Where ash retention is poor, a coagulant or microparticle programme is needed rather than more polymer.

How is textile colour removed?

Coagulation removes apparent colour carried by solids; activated carbon removes dissolved colour. Most dyeing plants need coagulation first, then carbon or a biological polish.

Silicone or polyether defoamer in a paper mill?

Polyether in high-shear white-water loops and where silicone residue would affect coating or food packaging. Silicone works faster but can cause defects downstream.

Can the same polymer serve paper and effluent sludge?

Usually two different grades: a low-dose retention aid on the machine and a higher-charge dewatering grade on the sludge. Using one grade for both is a false economy.

Send your water or material data.

We reply with a product route, indicative dosage and the documents you need.

Contact technical sales ↗